|
Post by lowtechguy on Feb 28, 2007 16:38:09 GMT
If you have cinquecento, seicento, bravo/a 1.2, punto mk1, punto mk2 etc with fire engines then the below applies to you:
The front brake calipers can be directly swapped from these cars to a Punto, in combination with at least 14" wheels for clearance issues:
Marea 1.6 auto saloon (not manual) Marea 1.6 estate Marea 1.8, 1.9TD 100 & TD110 (not 2.4) Tempra 2.0 petrol & TD Bravo/a 1.8, 1.9TD 100 Tipo 2.0 8 valve Punto GT mk1 Alfa 155 1.8 8v or 1.8 16v (not 2L)
These are 257mm ventilated discs, where the standard Punto items are 240mm solid ones.
The punto mk2 sporting and 1.2 and 1.4 bravo/a calipers fit too however these are 257mm solid versions.
|
|
|
Post by epifant on Mar 10, 2007 15:26:57 GMT
Nothing else needed than the above mentioned calipers and discs? New hoses off course, but no need for a caliper adapter?
|
|
|
Post by oldschool on Mar 10, 2007 19:05:58 GMT
The Panda JTD and 100hp even uses the same pad as the Cinquecento, Seicento, Punto 55/60/75. Punto Mk2 1.2 8v.
|
|
richie
Junior Member
Posts: 51
|
Post by richie on Mar 12, 2007 9:38:28 GMT
Nothing else needed than the above mentioned calipers and discs? New hoses off course, but no need for a caliper adapter? No need for any adapters no, they're all a straight swap.
|
|
|
Post by lowtechguy on Mar 16, 2007 11:07:58 GMT
red dot are very good but mainly cheaper than most others.
TBh, this is supposed to be a sticky so can you start a new thread please!
|
|