Post by eviljaxx on May 10, 2007 18:36:11 GMT
Hello,
Its not really a project at the moment but fitting the 100HP GSR kit turned out to be fun!
As this was a first attempt on the 100HP as far as I know... Nothing went smoothly but d**n finishing it really got a thumbs up from me and my dad
The kit itself is of superb quality and I wouldn’t expect anything less from Peter and the noise at first was a wee bit intrusive compared to the standard engine sound but I have to say I am getting use to it now!!
(Have to add the noise is amplified a lot due to the filter being in the wing!
Ok pictures... Firstly I left the air box in place as I prefer the engine bay to not be so open but it looks cool I guess... The awesum orange pipe goes well with the black and grey.
As mentioned the air box has been left in place just for looks really! Looks good though!
This is the replicated pipe... YES! your eyes do see a 90" copper bend pipe
worked a threat... Sadly had to cut the original 100HP pipe so returning to standard would require a new breather from Fiat and the other part of the replicated hose consists of a Seicento TB breather cut to fit and pipe blocked with a little screw... Other bits and bobs going on but nothing major!
Enjoy and of course a lot more on the way I guess
Cheers
Adam
Its not really a project at the moment but fitting the 100HP GSR kit turned out to be fun!
As this was a first attempt on the 100HP as far as I know... Nothing went smoothly but d**n finishing it really got a thumbs up from me and my dad
The kit itself is of superb quality and I wouldn’t expect anything less from Peter and the noise at first was a wee bit intrusive compared to the standard engine sound but I have to say I am getting use to it now!!
(Have to add the noise is amplified a lot due to the filter being in the wing!Ok pictures... Firstly I left the air box in place as I prefer the engine bay to not be so open but it looks cool I guess... The awesum orange pipe goes well with the black and grey.
As mentioned the air box has been left in place just for looks really! Looks good though!
This is the replicated pipe... YES! your eyes do see a 90" copper bend pipe
worked a threat... Sadly had to cut the original 100HP pipe so returning to standard would require a new breather from Fiat and the other part of the replicated hose consists of a Seicento TB breather cut to fit and pipe blocked with a little screw... Other bits and bobs going on but nothing major!Enjoy and of course a lot more on the way I guess
Cheers
Adam
